HK Ties » Tilt-up & Precast Products

Standard 8″ Tie (ST200)

HK Ties — Tue, 18 Nov 2008 05:37:54 +0000

HK™ Standard Low-Conductivity Wall Tie for 8-Inch Insulation.
Item Number: 283441

Product:	8-inch tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	8 in. /200 mm
Tie length:	11.38 in. /289 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.75 in. /19 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Insulation thickness:	8 in. /200 mm
Fascia Thickness:	2 to 4 in. / 50 to 100mm
Tensile Strength:	2,300 lb/10.23 kN
Pullout Strength:	2.300 lb/10.23 kN
Panel Shear/tie:	1,000 lb/4.44 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Standard 6″ Tie (ST150)

HK Ties — Tue, 18 Nov 2008 05:35:02 +0000

HK™ Standard Low-Conductivity Wall Tie for 6-Inch Insulation.
Item Number: 283440

Product:	6-inch tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	6 in. /150 mm
Tie length:	9.25 in. /235 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.57 in. /14.5 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Insulation thickness:	6 in. /150 mm
Fascia Thickness:	2 to 4 in. / 50 to 100mm
Tensile Strength:	1,500 lb/6.67kN
Pullout Strength:	1,500 lb/6.67kN
Panel Shear/tie:	500 lb/2.22 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Standard 4″ Tie (ST100)

HK Ties — Tue, 18 Nov 2008 05:32:28 +0000

HK™ Standard Low-Conductivity Wall Tie for 4-Inch Insulation.
Item Number: 283439

Product:	4-inch tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	4 in. /100 mm
Tie length:	7.25 in. /184 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.57 in. /14.5 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Fascia Thickness:	2 to 4 in. / 50 to 100 mm
Tensile Strength:	1,500 lb/6.67 kN
Pullout Strength:	1,500 lb/6.67 kN
Panel Shear/tie:	500 lb/2.22 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Standard 3″ Tie (ST75)

HK Ties — Tue, 18 Nov 2008 05:30:07 +0000

HK™ Standard Low-Conductivity Wall Tie for 3-Inch Insulation.
Item Number: 283429

Product:	3-inch tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	3 in. /75 mm
Tie length:	6.25 in. /160 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.57 in. /14.5 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Insulation thickness:	3 in. /75 mm
Fascia Thickness:	2 to 4 in. / 50 to 100 mm
Tensile Strength:	1,500 lb/6.67 kN
Pullout Strength:	1,500 lb/6.67 kN
Panel Shear/tie:	500 lb/2.22 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Standard 2.5″ Tie (ST60)

HK Ties — Tue, 18 Nov 2008 05:23:24 +0000

HK™ Standard Low-Conductivity Wall Tie for 2.5-Inch Insulation.
Item Number: 283425

Product:	2.5-inch tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	2.5 in. /64 mm
Tie length:	5.75 in. /146 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.5 in. /12.5 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Insulation thickness:	2.5 in. /64 mm
Fascia Thickness:	2 to 4 in. / 50 to 100mm
Tensile Strength:	1,100 lb/4.89kN
Pullout Strength:	1,100 lb/4.89kN
Panel Shear/tie:	400 lb/1.78 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Standard 2″ Tie (ST50)

HK Ties — Tue, 18 Nov 2008 05:17:43 +0000

HK™ Standard Low-Conductivity Wall Tie for 2-Inch Insulation.
Item Number: 283424

Product:	2-inch Tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick.
Insulation Thickness:	2 in. /50 mm
Tie length:	5.31 in. /135 mm
Embedment Depth:	1.5 in. /38 mm
Dia. through Foam:	0.5 in. /12.5 mm
Fire Performance:	Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Insulation thickness:	2 in. /50 mm
Fascia Thickness:	2 to 4 in. / 50 to 100 mm
Tensile Strength:	1,100 lb/4.89 kN
Pullout Strength:	1,100 lb/4.89 kN
Panel Shear/tie:	500 lb/2.22 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Double-Prong 1.5″ Tie (DP38)

HK Ties — Sun, 16 Nov 2008 22:00:40 +0000

HK™ Double-Prong Low-Conductivity Wall Tie
Item Number: 313813

Product:	1.5-inch Tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 3 inches thick or supported up to 4 inches thick.
Insulation Thickness:	1.5 in. /38 mm
Tie length:	4.75 in. /121 mm
Embedment Depth:	1.75 in. /44 mm and 1.50 in./38 mm
Dia. through Foam:	2 x 0.354 in./2 x 9.0mm
Fire Performance:	Resist 300-lb tension load for over 120 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Fascia Thickness:	2 to 4 in. / 50 to 100mm 1,100 lb/4.89kN
Tensile Strength:	1,100 lb/4.89 kN
Pullout Strength:	1,100 lb/4.89 kN
Panel Shear/tie:	400 lb/1.78 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr-ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.

Double-Prong 1.0″ Tie (DP25)

HK Ties — Sun, 16 Nov 2008 20:36:35 +0000

HK™ Double-Prong Low-Conductivity Wall Tie
Item Number: 313812

Product:	1-inch Tie for insulated concrete sandwich panels.
Applications:	Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 3 inches thick or supported up to 4 inches thick.
Insulation Thickness:	1 in. /25mm
Tie length:	4.25 in. /108 mm
Embedment Depth:	1.75 in. /44 mm and 1.50 in./38 mm
Dia. through Foam:	2 x 0.354 in./2 x 9.0mm
Fire Performance:	Resist 300-lb tension load for over 120 minutes when fire tested per Section 7.4.3 of ASTM E1512-01.
Fascia Thickness:	2 to 4 in. / 50 to 100 mm
Tensile Strength:	1,100 lb/4.89 kN
Pullout Strength:	1,100 lb/4.89 kN
Panel Shear/tie:	500 lb/2.22 kN
Alkaline Resistance:	Excellent ¹
Impact Resistance:	Excellent ²
Thermal Conductivity:	2.42 Btu-in/hr-ft²ºF 0.35 WmºK
See installation instructions (Pub. No. HK-ST-II) before using. 1 Base resin testing showed no change in properties when exposed to Alkalis. 2 The un-notched Izod Impact testing of the base resin yielded no break.