|
Standard 2" Tie (ST50)
HK™ Standard Low-Conductivity Wall Tie for 2-Inch Insulation.
Item Number: 283424
| Product: |
2-inch Tie for insulated concrete sandwich panels. |
| Applications: |
Pre-cast, pre-stressed, and tilt-up. Fascia may be supported or unsupported up to 4 inches thick. |
| Insulation Thickness: |
2 in. /50 mm |
| Tie length: |
5.31 in. /135 mm |
| Embedment Depth: |
1.5 in. /38 mm |
| Dia. through Foam: |
0.5 in. /12.5 mm |
| Fire Performance: |
Resist 300-lb tension load for over 90 minutes when fire tested per Section 7.4.3 of ASTM E1512-01. |
| Insulation thickness: |
2 in. /50 mm |
| Fascia Thickness: |
2 to 4 in. / 50 to 100 mm |
| Tensile Strength: |
1,100 lb/4.89 kN |
| Pullout Strength: |
1,100 lb/4.89 kN |
| Panel Shear/tie: |
500 lb/2.22 kN |
| Alkaline Resistance: |
Excellent 1 |
| Impact Resistance: |
Excellent 2 |
| Thermal Conductivity: |
2.42 Btu-in/hr ft2ºF
0.35 WmºK |
See installation instructions (Pub. No. HK-ST-II) before using.
1 Base resin testing showed no change in properties when exposed to Alkalis.
2 The un-notched Izod Impact testing of the base resin yielded no break.
|
|
